Designing With HyperTransport™ Technology

PMC-Sierra, as a member of the HyperTransport™ Technology Consortium, would like to invite you to attend the Designing With HyperTransport Technology Webinar sponsored by HyperTransport Consortium.

What to Expect

The free net broadcast on September 22, 2004, will provide an in-depth overview of how to get started with your HyperTransport-based board design. Included in this discussion will be a detailed look at Tunnel, Cave, Switch, and Bridge devices, using the packet based protocol features like credit-based flow control and CRC error handling. These are just a few of discussion topics that will be presented.

This webinar will cover:

1. Legitimate scaling of link width and clock speed
2. Tunnel, Cave, Switch, and Bridge device types
3. Characteristics of low and high-speed signal groups
4. Packet based protocol features credit-based flow control and CRC error handling
5. Transaction type summary
6. Standard and Isochronous transfer support
7. Overview of Networking Extensions

About the Presenter

Who Should Attend

Engineers and Technical Managers, Designers, Innovators and Technology Leaders

Archived Webcasts from HyperTransport Consortium

• HyperTransport - An Optimized Board Level Architecture Overview, recorded on May 26, 2004, presented by Mario Cavalli, General Manager of the HyperTransport Consortium and Brian Holden, Chair of the Technical Working Group of the HyperTransport Consortium and Principal Engineer of PMC-Sierra
• Advanced HyperTransport 2.0 Functionality, recorded on June 14, 2004, presented by Brian Holden, Chair of the Technical Working Group of the HyperTransport Consortium and Principal Engineer of PMC-Sierra