|
Products
|
PCI Express 2.0 8-Port SAS-2 RAID Controller
Key Features
- Eight-port SAS/SATA 1.5G/3G/6G fully offloaded protocol controller
- Multiplexes two 3 Gbit/s SAS PHYs into a 6 Gbit/s SAS PHY
- Flexible wide-port capability supports any combination of widths up to eight serial interfaces per wide port
- Eight PCI Express PHYs compliant with base specification 2.0, operating at 5 Gbit/s and 2.5 Gbit/s per link
- Ultra-high performance RoCstar Architecture with Global Shared Memory
- 32/64-bit DDR2 with optional ECC support
- Computes RAID 6 via bit-wise XOR and Reed Solomon (P+Q) on two simultaneous data streams
- Checking, insertion and replacement of T10 DIF as defined by SBC-2
Benefits
- Supports all RAID levels: 0/1/10/5/50/6 and 60
- Higher system performance with hardware accelerated RAID 5 and 6
- Tunable performance with multiple programmable integrated processors
- Greater reliability of critical data with end-to-end data path error protection
- Preserves legacy system support through backward compatibility with SAS 1.0a and PCIe 1.0
PM8010 maxSAS SRC 8x6G detailed product information
PM8010 maxSAS SRC 8x6G news release
|
|
Industry’s First 6Gbit/s SAS/SATA Architecture for Enterprise-Class Storage Systems
Key Features
SAS/SATA Interface
- 8 channel 1.5G/3G/6G SAS/SATA protocol controller
- HW SAS core for maximum performance
- High Density HDD support
- SAS 2.0 compliant Multiplexing
- Supports SSP, SMP, STP and direct-attached SATA protocols
- Full bi-directional bandwidth up to 1.2Gbit/s bidirectional per PHY simultaneously
- Flexible wide port capability.
PCI-Express Interface
- Compliant to PCIe 2.0 and backward compliant to PCIe
- 8 PHYs operating at 5Gbit/s and 2.5Gbit/s
PM8000 Tachyon SPC 8x6G detailed product information
PM8000 Tachyon SPC 8x6G news release
|
|
|
Benefits
- 1.5G, 3.0G, or 6.0G recording
- Host and device emulator options
- 4 wide miniSAS initiator and target ports
- Up to 32 ports with cascading
- Advanced state triggering GUI
- Protocol error detection
- Pre- and post-recording filtering
- Spread spectrum clocking support
- Performance analysis
- Simulated waveform display of OOB sequence
Catalyst Introduces STX-460 for 6 Gb/s SAS and SATA Protocol Analysis news release
|
|
Features
- 1.5, 3, and 6 Gb/s SAS, 1.5 and 3Gb/s SATA
- DWORD search to quickly find information within frames
- SAS-2 Multiplexing capable
- Choice between passive passthrough or active signal retiming
- Graphical display to show OOB Sequences
Benefits
- Implementation of SAS-2 at all speeds supports testing SAS-2 features at lower clock rates
- Native Mini-SAS 4x Connector Interfaces simplify cabling
- Passive “Analog Passthrough” minimizes analyzer’s effect on network traffic
XGIG 6 Gb/s SAS/SATA Analyzer detailed product information XGIG 6 Gb/s SAS/SATA Analyzer news release
|
|
Features
- Four SAS analysis ports (6 or 3 Gbps) - Monitor, trigger and record up to 4 Serial Attached SCSI links simultaneously
- Complete Serial ATA Recording and Analysis (6, 3 or 1.5 Gbps) - The Avalanche system is designed to be plug-and-play compatible with Serial ATA
- State Machine Triggering - Isolate areas of interest with real-time hardware triggering
- Hardware Filtering - Extend capture window by removing non-essential primitives from the recording
- Raw Bit Recording - Analyzes traffic at the lowest possible level
- SAS Zoning and Multiplexing Capable - Capture, record and analyze traffic in complex storage network environments
- Cascade Multiple Analyzers - By cascading up to 8 analyzers, time correlated traces for up to 32 channels can be recorded
- Traffic Summaries - Statistical reports provide high-level abstraction of events, operations, errors and OOB transactions
- Automatic Decoding at OOB View, Frame and Transport Layers; SCSI STP, and SMP Transactions - View high-level Serial Attached SCSI protocol events
Avalanche SAS Protocol Analyzer detailed product information Avalanche SAS Protocol Analyzer news release
|
|
|
