Need More Information?

PM5386 S/UNI® 4xJET
4-Channel ATM and Bit HDLC User Network Interface

Documents

> Are you seeing all your results?
If you are a PMC-Sierra Customer or Partner you may have permission to see additional results.
Please log in to display additional results.

Version Issue Date

Product Brief

PDFPM5386 S/UNI 4xJET 4-Channel ATM and Bit HDLC User Network Interface Short Form Data Sheet [63 kB] PMC-2021631 2002-10-17 

Data Sheet

Locked Document, Log In RequiredPDFPM5386 S/UNI 4xJET ASSP Telecom Standard Product Data Sheet Register Description [2.34 MB] PMC-2030240 2003-05-12 
Locked Document, Log In RequiredPDFPM5386 S/UNI-4xJET ASSP Telecom Standard Product Data Sheet [1.99 MB] PMC-2021632 2003-05-14 

Errata

Locked Document, Log In RequiredPDFPM5386 S/UNI 4xJET Device Errata Revision A [177 KB] PMC-2030898 2003-11-25 

Software Documentation

Locked Document, Log In RequiredPDFPM5386 S/UNI 4xJET ASSP Telecom Standard Product Data Sheet Register Description [2.34 MB] PMC-2030240 2003-05-12 

Software

Locked Document, Log In RequiredPDFPM5386 SUNI-4xJET Device Driver [64 kB] PMC-2030355 Rel 1.0  2003-04-03 

Presentation

Locked Document, Log In RequiredPPTS/UNI-12xJET and S/UNI-4xJET Device Overview [809 kB] 2003-01-06 

BSDL Files

Text / Binary FileBoundary Scan Description Language (BSDL) file for the PM5386 S/UNI 4xJET Rev A [60 kB] PMC-2030339 2003-03-28 

Features

MODES OF OPERATION

  • Single chip 4-channel DS-3/E3/J2 framer and ATM/bit-HDLC mapper into POS-PHY/Utopia interface. Each channel can be individually configured for the desired rate and data format.
  • Provides synchronization and desynchronization of DS-3 and E3 serial streams to and from SONET/SDH payloads.
  • Implements ATM or byte-HDLC User Network Interface on SONET/SDH payloads including STS-1/STM-0/STS-3c/STM-1 into POS-PHY/Utopia interface.
  • May be configured solely as a DS-3, E3 (G.751 and G.832), and J2 framer.
  • Allows external sub-rate DS-3/E3/J2 processing for all four channels.

FEATURES

  • Provides four DS-3/E3/J2 clock and data serial ports for direct connection to external line interface units.
  • Provides four auxiliary serial ports when using the device as a DS-3, E3, or J2 framer.
  • Provides four serial flexible bandwidth links allowing bit-HDLC/ATM cell delineation of data rates up to 52 Mbit/s.
  • Provides an 8-bit 77.76 MHz TelecomBus to interface with transport devices such as framers or switch elements.
  • Provides support for the SATURN POS-PHY / UTOPIA 16-bit Level 2 / 32-bit Level 3 system interface for ATM and HDLC packet data.
  • Implements the ATM Forum user Network Interface Specification and the ATM physical layer for broadband ISDN according to CCITT Recommendation I.432 on arbitrary SONET/SDH payloads including STS-1/STM-0/STS-3c/STM-1 payloads.
  • Implements the Point-to-Point Protocol (PPP) over SONET/SDH specification according to RFC 2615 and RFC 1662 on arbitrary STS-1/STM-0 payloads.
  • Implements ATM Direct Cell Mapping or bit-HDLC Mapping into DS1, DS-3, E1, E3, and J2 transmission systems according to ITU-T Recommendation G.804.
  • Implements the Physical Layer Convergence Protocol (PLCP) for DS1 and DS-3 transmission systems according to the ATM Forum User Network Interface Specification, ANSI TA-TSY-000773, TA-TSY-000772, and E1 and E3 transmission systems according to ETSI 300-269 and ETSI 300-270.
  • Compatible with PMC-Sierra T1/E1 frame/line interface chips such as the TEMUX and TEMAP devices for DS1 and E1 applications. Provides programmable pseudorandom test pattern generation, detection, and analysis features. Provides integral transmit and receive data-link HDLC controllers with 128-byte FIFO depths for each serial channel.
  • Provides performance-monitoring counters suitable for accumulation periods of up to 1 second.
  • Provides a 16-bit microprocessor interface for configuration, control and status monitoring.
  • Provides a standard 5-signal P1149.1 JTAG test port for boundary scan board test purposes.
  • Low power 3.3V / 1.8V CMOS technology with 5V tolerant inputs.
  • Available in a high density 580-pin TSBGA package (35 mm x 35 mm) with 1mm ball pitch.

DEVICE INTERNETWORKING

Other PMC-Sierra devices that implement the POS-PHY Level 3 interface include:

  • PM3386: SUNI 2xGE - Dual gigabit ethernet controller.
  • PM3387: SUNI 1xGE - Single gigabit ethernet controller.
  • PM5354: SUNI MULTI 2x12 - Multi-rate OC-12x/OC-3c ATM and POS.
  • PM5358: SUNI 4x622 - Quad channel OC-12c ATM and POS.
  • PM5360: SUNI MULTI 48 - Multi-rate OC-48c/OC-12c/OC-3c ATM and POS.
  • PM5379: SUNI 4x155 - Quad channel OC-3c ATM and POS.
  • PM5380: SUNI 8x155 - Eight channel OC-3c ATM and POS.
  • PM5381: SUNI 2488 - Single channel OC-48c ATM and POS.
  • PM5382: SUNI 16x155 - Sixteen channel OC-3c ATM and POS.
  • PM5383: SUNI 12xJET - Twelve channel DS3 ATM and POS.
  • PM7325: SUNI ATLAS 3200 - 2.488G ATM layer solution.
  • PM7390: SUNI MACH 48 - Multi service access device for channelized interfaces.

Applications

  • Four-port DS-3/E3/J2 ATM/bit-HDLC termination in multi-service switches and routers.
  • Channelized OC-3 line interfaces in multi-service switches and routers.
  • PDH Mux DS-3/E3/J2 line interfaces.
  • J2/E3/DS3 digital cross-connect interfaces.
  • J2/E3/DS3 PPP Internet access interfaces.
  • J2/E3/DS3 frame relay interfaces.
 
 
This site's design is only visible in a graphical browser that supports web standards,
but its content is accessible to any browser or Internet device.