Need More Information?

PM5379 S/UNI® 4x155
Single chip ATM and Packet over SONET/SDH 4-channel Physical Layer Device

Documents

> Are you seeing all your results?
If you are a PMC-Sierra Customer or Partner you may have permission to see additional results.
Please log in to display additional results.

Version Issue Date

Product Brief

PDFPM5379 S/UNI 4x155 4-Channel OC-3c ATM and POS Physical Layer Device Short Form Data Sheet [58 kB] PMC-2022055 1  2002-12-04 

Data Sheet

Locked Document, Log In RequiredPDFS/UNIr-4x155 Telecom Standard Product Data Sheet [1.88 MB] PMC-2021468 2  2002-10-17 

Application Note

Locked Document, Log In RequiredPDFDesign Considerations for External APS Applications [169 kB] PMC-2020778 1  2002-09-24 
Locked Document, Log In RequiredPDFConfiguration Guide for S/UNI-16x155, S/UNI-8x155 and S/UNI-4x155 [268 kB] PMC-2021321 2  2003-12-31 

Errata

Locked Document, Log In RequiredPDFS/UNI?-4x155 Device Errata [214 KB] PMC-2030118 2  2004-01-07 

Features

  • Single chip ATMand Packet over SONET/SDH 4-channel Physical Layer Device operating at 155.52 Mbit/s.
  • Implements the ATM Forum User Network Interface Specification and the ATM physical layer for Broadband ISDN according to ITU Recommendation I.432.
  • Implements the Point-to-Point Protocol (PPP) over SONET/SDH specification according to RFC 2615 and RFC 1662.
  • Processes four duplex bit-serial 155.52Mbit/s STS-3c/STM-1 data streams with on-chip clock and data recovery and clock synthesis.
  • Complies with Bellcore GR-253-CORE (2000 Issue) jitter tolerance, jitter transfer (1995 Issue) and intrinsic jitter criteria.
  • Provides control circuitry required to comply with Bellcore GR-253-CORE WAN clocking requirements related to wander transfer, holdover and long term stability when using an external VCXO.
  • Provides support functions for 1+1 APS and 1:N operation.
  • Provides UTOPIA Level 3 compatible 32-bit wide System Interface (clocked up to 104 MHz) with parity support for ATM applications.
  • Provides SATURN POS-PHY Level 3 32-bit System Interface (clocked up to 104 MHz) for Packet over SONET/SDH (POS) and ATM applications.
  • Provides a standard 5 signal IEEE 1149.1 JTAG test port for boundary scan board test purposes.
  • Provides a generic 8-bit microprocessor bus interface for configuration, control, and status monitoring.
  • Hardware and software compatible with the PM5380 S/UNI 8x155, PM5382 S/UNI 16x155, and PM5358 S/UNI 4x622.
  • Low power 2.5/3.3 volt CMOS with 5-volt TTL compatible digital inputs and outputs. PECL inputs and outputs are 3.3 volt and 5 volt compatible.
  • Industrial temperature range (-40 °C to +85 °C).
  • 520-pin Super BGA package.

DEVICE INTERNETWORKING

Other PMC-Sierra devices that implement the POS-PHY Level 3 interface include:

  • PM3386: SUNI 2xGE - Dual gigabit ethernet controller.
  • PM3387: SUNI 1xGE - Single gigabit ethernet controller.
  • PM5354: SUNI MULTI 2x12 - Multi-rate OC-12x/OC-3c ATM and POS.
  • PM5358: SUNI 4x622 - Quad channel OC-12c ATM and POS.
  • PM5360: SUNI MULTI 48 - Multi-rate OC-48c/OC-12c/OC-3c ATM and POS.
  • PM5380: SUNI 8x155 - Eight channel OC-3c ATM and POS.
  • PM5381: SUNI 2488 - Single channel OC-48c ATM and POS.
  • PM5382: SUNI 16x155 - Sixteen channel OC-3c ATM and POS.
  • PM5383: SUNI 12xJET - Twelve channel DS3 ATM and POS.
  • PM5386: SUNI 4xJET - Quad channel DS3 ATM and POS.
  • PM7325: SUNI ATLAS 3200 - 2.488G ATM layer solution.
  • PM7390: SUNI MACH 48 - Multi service access device for channelized interfaces.

Applications

  • WAN and Edge ATM switches.
  • LAN switches and hubs.
  • Packet switches and hubs.
  • Routers and Layer 3 Switches
  • Network Interface Cards and Uplinks
 
 
This site's design is only visible in a graphical browser that supports web standards,
but its content is accessible to any browser or Internet device.